Bienvenue, Invité
Nom d'utilisateur Mot de passe: Se souvenir de moi

[Résolu] Problème de X - Écran noir
(1 visualisation(s)) (1) Invité
  • Page:
  • 1

SUJET: [Résolu] Problème de X - Écran noir

[Résolu] Problème de X - Écran noir il y a 11 mois, 2 semaines #145776

Bonjour à tous !

Suite à une fausse manip', mon serveur X a été foutu en l'air. J'ai entrepris de réinstaller tout ce foutoir de cartes graphiques, et après moultes péripéties, je bloque. Quand je boot, s'affiche d'abord mon tty1 puis après quelque seconde s'allume X, résultant en un écran noir... Je ne sais plus quoi faire !

Voici qui devrait vous intéresser !

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.48 (pbuilder@cake) Wed Sep 12 10:54:51 UTC 2012

 
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
 
Section "Files"
EndSection
 
Section "InputDevice"
 
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
 
Section "InputDevice"
 
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
 
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
 
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
EndSection
 
Section "Device"
Identifier "Device1"
Driver "intel"
BusID "PCI:00:02:0"
EndSection
 
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
 


et mon /var/log/Xorg.0.log

 
[ 119.327]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 119.327] X Protocol Version 11, Revision 0
[ 119.327] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 119.327] Current Operating System: Linux prout 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64
[ 119.327] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=f321cc05-df86-4887-b471-3697297baca1 ro quiet
[ 119.327] Build Date: 05 November 2012 09:49:47AM
[ 119.327] xorg-server 2:1.12.4-3 (Julien Cristau <jcristau@debian.org>)
[ 119.327] Current version of pixman: 0.26.0
[ 119.327] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 119.328] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 119.328] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 6 22:15:20 2013
[ 119.328] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 119.328] (==) No Layout section. Using the first Screen section.
[ 119.328] (==) No screen section available. Using defaults.
[ 119.328] (**) |-->Screen "Default Screen Section" (0)
[ 119.328] (**) | |-->Monitor "<default monitor>"
[ 119.329] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 119.329] (==) Automatically adding devices
[ 119.329] (==) Automatically enabling devices
[ 119.329] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 119.329] Entry deleted from font path.
[ 119.329] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 119.329] Entry deleted from font path.
[ 119.329] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 119.329] Entry deleted from font path.
[ 119.329] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 119.329] Entry deleted from font path.
[ 119.329] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 119.329] Entry deleted from font path.
[ 119.329] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 119.329] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 119.329] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 119.329] (II) Loader magic: 0x7f88cf282ae0
[ 119.329] (II) Module ABI versions:
[ 119.329] X.Org ANSI C Emulation: 0.4
[ 119.329] X.Org Video Driver: 12.1
[ 119.329] X.Org XInput driver : 16.0
[ 119.329] X.Org Server Extension : 6.0
[ 119.330] (--) PCI:*(0:0:2:0) 8086:0126:1043:1682 rev 9, Mem @ 0xdd400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64
[ 119.330] (II) Open ACPI successful (/var/run/acpid.socket)
[ 119.331] (II) LoadModule: "extmod"
[ 119.331] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 119.332] (II) Module extmod: vendor="X.Org Foundation"
[ 119.332] compiled for 1.12.4, module version = 1.0.0
[ 119.332] Module class: X.Org Server Extension
[ 119.332] ABI class: X.Org Server Extension, version 6.0
[ 119.332] (II) Loading extension SELinux
[ 119.332] (II) Loading extension MIT-SCREEN-SAVER
[ 119.332] (II) Loading extension XFree86-VidModeExtension
[ 119.332] (II) Loading extension XFree86-DGA
[ 119.332] (II) Loading extension DPMS
[ 119.332] (II) Loading extension XVideo
[ 119.332] (II) Loading extension XVideo-MotionCompensation
[ 119.332] (II) Loading extension X-Resource
[ 119.332] (II) LoadModule: "dbe"
[ 119.332] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 119.332] (II) Module dbe: vendor="X.Org Foundation"
[ 119.332] compiled for 1.12.4, module version = 1.0.0
[ 119.332] Module class: X.Org Server Extension
[ 119.332] ABI class: X.Org Server Extension, version 6.0
[ 119.332] (II) Loading extension DOUBLE-BUFFER
[ 119.332] (II) LoadModule: "glx"
[ 119.332] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 119.341] (II) Module glx: vendor="NVIDIA Corporation"
[ 119.341] compiled for 4.0.2, module version = 1.0.0
[ 119.341] Module class: X.Org Server Extension
[ 119.341] (II) NVIDIA GLX Module 304.48 Sun Sep 9 20:42:38 PDT 2012
[ 119.341] (II) Loading extension GLX
[ 119.341] (II) LoadModule: "record"
[ 119.341] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 119.341] (II) Module record: vendor="X.Org Foundation"
[ 119.341] compiled for 1.12.4, module version = 1.13.0
[ 119.341] Module class: X.Org Server Extension
[ 119.341] ABI class: X.Org Server Extension, version 6.0
[ 119.341] (II) Loading extension RECORD
[ 119.341] (II) LoadModule: "dri"
[ 119.341] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 119.341] (II) Module dri: vendor="X.Org Foundation"
[ 119.341] compiled for 1.12.4, module version = 1.0.0
[ 119.341] ABI class: X.Org Server Extension, version 6.0
[ 119.341] (II) Loading extension XFree86-DRI
[ 119.341] (II) LoadModule: "dri2"
[ 119.341] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 119.341] (II) Module dri2: vendor="X.Org Foundation"
[ 119.341] compiled for 1.12.4, module version = 1.2.0
[ 119.341] ABI class: X.Org Server Extension, version 6.0
[ 119.341] (II) Loading extension DRI2
[ 119.341] (==) Matched intel as autoconfigured driver 0
[ 119.342] (==) Matched vesa as autoconfigured driver 1
[ 119.342] (==) Matched fbdev as autoconfigured driver 2
[ 119.342] (==) Assigned the driver to the xf86ConfigLayout
[ 119.342] (II) LoadModule: "intel"
[ 119.342] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 119.342] (II) Module intel: vendor="X.Org Foundation"
[ 119.342] compiled for 1.12.3.902, module version = 2.19.0
[ 119.342] Module class: X.Org Video Driver
[ 119.342] ABI class: X.Org Video Driver, version 12.1
[ 119.342] (II) LoadModule: "vesa"
[ 119.342] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 119.342] (II) Module vesa: vendor="X.Org Foundation"
[ 119.342] compiled for 1.12.1, module version = 2.3.1
[ 119.342] Module class: X.Org Video Driver
[ 119.342] ABI class: X.Org Video Driver, version 12.0
[ 119.342] (II) LoadModule: "fbdev"
[ 119.342] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 119.342] (II) Module fbdev: vendor="X.Org Foundation"
[ 119.342] compiled for 1.12.1, module version = 0.4.2
[ 119.342] ABI class: X.Org Video Driver, version 12.0
[ 119.342] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 119.342] (II) VESA: driver for VESA chipsets: vesa
[ 119.342] (II) FBDEV: driver for framebuffer: fbdev
[ 119.342] (++) using VT number 8
 
[ 119.348] (WW) Falling back to old probe method for vesa
[ 119.348] (WW) Falling back to old probe method for fbdev
[ 119.348] (II) Loading sub module "fbdevhw"
[ 119.348] (II) LoadModule: "fbdevhw"
[ 119.348] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 119.348] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 119.348] compiled for 1.12.4, module version = 0.0.2
[ 119.348] ABI class: X.Org Video Driver, version 12.1
[ 119.349] drmOpenDevice: node name is /dev/dri/card0
[ 119.349] drmOpenDevice: open result is 9, (OK)
[ 119.349] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 119.349] drmOpenDevice: node name is /dev/dri/card0
[ 119.349] drmOpenDevice: open result is 9, (OK)
[ 119.349] drmOpenByBusid: drmOpenMinor returns 9
[ 119.349] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 119.349] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 119.349] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 119.349] (==) intel(0): RGB weight 888
[ 119.349] (==) intel(0): Default visual is TrueColor
[ 119.349] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 119.349] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 119.349] (**) intel(0): Relaxed fencing enabled
[ 119.349] (**) intel(0): Wait on SwapBuffers? enabled
[ 119.349] (**) intel(0): Triple buffering? enabled
[ 119.349] (**) intel(0): Framebuffer tiled
[ 119.349] (**) intel(0): Pixmaps tiled
[ 119.349] (**) intel(0): 3D buffers tiled
[ 119.349] (**) intel(0): SwapBuffers wait enabled
[ 119.349] (==) intel(0): video overlay key set to 0x101fe
[ 119.349] (II) intel(0): Output LVDS1 has no monitor section
[ 119.349] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 119.349] (II) intel(0): Output VGA1 has no monitor section
[ 119.373] (II) intel(0): Output HDMI1 has no monitor section
[ 119.420] (II) intel(0): Output DP1 has no monitor section
[ 119.420] (II) intel(0): EDID for output LVDS1
[ 119.420] (II) intel(0): Manufacturer: CMO Model: 1721 Serial#: 0
[ 119.420] (II) intel(0): Year: 2009 Week: 5
[ 119.420] (II) intel(0): EDID Version: 1.3
[ 119.420] (II) intel(0): Digital Display Input
[ 119.420] (II) intel(0): Max Image Size [cm]: horiz.: 39 vert.: 22
[ 119.420] (II) intel(0): Gamma: 2.20
[ 119.420] (II) intel(0): No DPMS capabilities specified
[ 119.420] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 119.420] (II) intel(0): First detailed timing is preferred mode
[ 119.420] (II) intel(0): redX: 0.617 redY: 0.336 greenX: 0.321 greenY: 0.596
[ 119.420] (II) intel(0): blueX: 0.160 blueY: 0.081 whiteX: 0.313 whiteY: 0.329
[ 119.420] (II) intel(0): Manufacturer's mask: 0
[ 119.420] (II) intel(0): Supported detailed timing:
[ 119.420] (II) intel(0): clock: 97.8 MHz Image Size: 382 x 215 mm
[ 119.420] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 119.420] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 119.420] (II) intel(0): N173FGE-L21
[ 119.420] (II) intel(0): CMO
[ 119.420] (II) intel(0): N173FGE-L21
[ 119.420] (II) intel(0): EDID (in hex):
[ 119.420] (II) intel(0): 00ffffffffffff000daf211700000000
[ 119.420] (II) intel(0): 05130103802716780a06359e56529829
[ 119.420] (II) intel(0): 14505400000001010101010101010101
[ 119.420] (II) intel(0): 0101010101012f2640a060841a303020
[ 119.420] (II) intel(0): 35007ed710000018000000fe004e3137
[ 119.420] (II) intel(0): 334647452d4c32310a20000000fe0043
[ 119.420] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 119.420] (II) intel(0): 004e3137334647452d4c32310a2000c3
[ 119.420] (II) intel(0): EDID vendor "CMO", prod id 5921
[ 119.420] (II) intel(0): Printing DDC gathered Modelines:
[ 119.420] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 119.421] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 119.421] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 119.421] (II) intel(0): Printing probed modes for output LVDS1
[ 119.421] (II) intel(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 119.421] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 119.421] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 119.421] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 119.421] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 119.421] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 119.421] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 119.421] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 119.421] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 119.421] (II) intel(0): EDID for output VGA1
[ 119.445] (II) intel(0): EDID for output HDMI1
[ 119.492] (II) intel(0): EDID for output DP1
[ 119.492] (II) intel(0): Output LVDS1 connected
[ 119.492] (II) intel(0): Output VGA1 disconnected
[ 119.492] (II) intel(0): Output HDMI1 disconnected
[ 119.492] (II) intel(0): Output DP1 disconnected
[ 119.492] (II) intel(0): Using exact sizes for initial modes
[ 119.492] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 119.492] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 119.492] (II) intel(0): Kernel page flipping support detected, enabling
[ 119.492] (**) intel(0): Display dimensions: (390, 220) mm
[ 119.492] (**) intel(0): DPI set to (104, 103)
[ 119.492] (II) Loading sub module "fb"
[ 119.492] (II) LoadModule: "fb"
[ 119.493] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 119.493] (II) Module fb: vendor="X.Org Foundation"
[ 119.493] compiled for 1.12.4, module version = 1.0.0
[ 119.493] ABI class: X.Org ANSI C Emulation, version 0.4
[ 119.493] (II) Loading sub module "dri2"
[ 119.493] (II) LoadModule: "dri2"
[ 119.493] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 119.493] (II) Module dri2: vendor="X.Org Foundation"
[ 119.493] compiled for 1.12.4, module version = 1.2.0
[ 119.493] ABI class: X.Org Server Extension, version 6.0
[ 119.493] (II) UnloadModule: "vesa"
[ 119.493] (II) Unloading vesa
[ 119.493] (II) UnloadModule: "fbdev"
[ 119.493] (II) Unloading fbdev
[ 119.493] (II) UnloadSubModule: "fbdevhw"
[ 119.493] (II) Unloading fbdevhw
[ 119.494] (==) Depth 24 pixmap format is 32 bpp
[ 119.494] (II) intel(0): [DRI2] Setup complete
[ 119.494] (II) intel(0): [DRI2] DRI driver: i965
[ 119.494] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 119.496] (II) UXA(0): Driver registered support for the following operations:
[ 119.496] (II) solid
[ 119.496] (II) copy
[ 119.496] (II) composite (RENDER acceleration)
[ 119.496] (II) put_image
[ 119.496] (II) get_image
[ 119.496] (==) intel(0): Backing store disabled
[ 119.496] (==) intel(0): Silken mouse enabled
[ 119.496] (II) intel(0): Initializing HW Cursor
[ 119.496] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 119.498] (==) intel(0): DPMS enabled
[ 119.498] (==) intel(0): Intel XvMC decoder enabled
[ 119.498] (II) intel(0): Set up textured video
[ 119.498] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 119.498] (II) intel(0): direct rendering: DRI2 Enabled
[ 119.498] (==) intel(0): hotplug detection: "enabled"
[ 119.564] (--) RandR disabled
[ 119.564] (II) Initializing built-in extension Generic Event Extension
[ 119.564] (II) Initializing built-in extension SHAPE
[ 119.564] (II) Initializing built-in extension MIT-SHM
[ 119.564] (II) Initializing built-in extension XInputExtension
[ 119.564] (II) Initializing built-in extension XTEST
[ 119.564] (II) Initializing built-in extension BIG-REQUESTS
[ 119.564] (II) Initializing built-in extension SYNC
[ 119.564] (II) Initializing built-in extension XKEYBOARD
[ 119.564] (II) Initializing built-in extension XC-MISC
[ 119.564] (II) Initializing built-in extension SECURITY
[ 119.564] (II) Initializing built-in extension XINERAMA
[ 119.564] (II) Initializing built-in extension XFIXES
[ 119.564] (II) Initializing built-in extension RENDER
[ 119.564] (II) Initializing built-in extension RANDR
[ 119.564] (II) Initializing built-in extension COMPOSITE
[ 119.564] (II) Initializing built-in extension DAMAGE
[ 119.564] (II) SELinux: Disabled on system
[ 119.568] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 119.576] (II) intel(0): Setting screen physical size to 423 x 238
[ 119.612] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 119.612] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 119.612] (II) LoadModule: "evdev"
[ 119.612] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 119.612] (II) Module evdev: vendor="X.Org Foundation"
[ 119.612] compiled for 1.12.1, module version = 2.7.0
[ 119.612] Module class: X.Org XInput Driver
[ 119.612] ABI class: X.Org XInput driver, version 16.0
[ 119.612] (II) Using input driver '
evdev' for 'Power Button'
[ 119.612] (**) Power Button: always reports core events
[ 119.612] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 119.613] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 119.613] (--) evdev: Power Button: Found keys
[ 119.613] (II) evdev: Power Button: Configuring as keyboard
[ 119.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 119.613] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 119.613] (**) Option "xkb_rules" "evdev"
[ 119.613] (**) Option "xkb_model" "pc105"
[ 119.613] (**) Option "xkb_layout" "fr"
[ 119.648] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 119.648] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 119.648] (II) Using input driver '
evdev' for 'Video Bus'
[ 119.648] (**) Video Bus: always reports core events
[ 119.648] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 119.648] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 119.648] (--) evdev: Video Bus: Found keys
[ 119.648] (II) evdev: Video Bus: Configuring as keyboard
[ 119.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[ 119.648] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 119.648] (**) Option "xkb_rules" "evdev"
[ 119.648] (**) Option "xkb_model" "pc105"
[ 119.648] (**) Option "xkb_layout" "fr"
[ 119.649] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 119.649] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 119.649] (II) Using input driver '
evdev' for 'Video Bus'
[ 119.649] (**) Video Bus: always reports core events
[ 119.649] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 119.649] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 119.649] (--) evdev: Video Bus: Found keys
[ 119.649] (II) evdev: Video Bus: Configuring as keyboard
[ 119.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8/event8"
[ 119.649] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 119.649] (**) Option "xkb_rules" "evdev"
[ 119.649] (**) Option "xkb_model" "pc105"
[ 119.649] (**) Option "xkb_layout" "fr"
[ 119.650] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 119.651] (II) No input driver specified, ignoring this device.
[ 119.651] (II) This device may have been added with another device file.
[ 119.651] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 119.651] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 119.651] (II) Using input driver '
evdev' for 'Sleep Button'
[ 119.651] (**) Sleep Button: always reports core events
[ 119.651] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 119.651] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 119.651] (--) evdev: Sleep Button: Found keys
[ 119.651] (II) evdev: Sleep Button: Configuring as keyboard
[ 119.651] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 119.651] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 119.651] (**) Option "xkb_rules" "evdev"
[ 119.651] (**) Option "xkb_model" "pc105"
[ 119.651] (**) Option "xkb_layout" "fr"
[ 119.653] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event5)
[ 119.653] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[ 119.653] (II) Using input driver '
evdev' for 'USB 2.0 UVC VGA WebCam'
[ 119.653] (**) USB 2.0 UVC VGA WebCam: always reports core events
[ 119.653] (**) evdev: USB 2.0 UVC VGA WebCam: Device: "/dev/input/event5"
[ 119.653] (--) evdev: USB 2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5710
[ 119.653] (--) evdev: USB 2.0 UVC VGA WebCam: Found keys
[ 119.653] (II) evdev: USB 2.0 UVC VGA WebCam: Configuring as keyboard
[ 119.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5/event5"
[ 119.653] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 10)
[ 119.653] (**) Option "xkb_rules" "evdev"
[ 119.653] (**) Option "xkb_model" "pc105"
[ 119.653] (**) Option "xkb_layout" "fr"
[ 119.654] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 119.654] (II) No input driver specified, ignoring this device.
[ 119.654] (II) This device may have been added with another device file.
[ 119.655] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 119.655] (II) No input driver specified, ignoring this device.
[ 119.655] (II) This device may have been added with another device file.
[ 119.655] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 119.655] (II) No input driver specified, ignoring this device.
[ 119.655] (II) This device may have been added with another device file.
[ 119.656] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
[ 119.656] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 119.656] (II) Using input driver '
evdev' for 'Asus WMI hotkeys'
[ 119.656] (**) Asus WMI hotkeys: always reports core events
[ 119.656] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event6"
[ 119.656] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 119.656] (--) evdev: Asus WMI hotkeys: Found keys
[ 119.656] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 119.656] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input6/event6"
[ 119.656] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 119.656] (**) Option "xkb_rules" "evdev"
[ 119.656] (**) Option "xkb_model" "pc105"
[ 119.656] (**) Option "xkb_layout" "fr"
[ 119.657] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 119.657] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 119.657] (II) Using input driver '
evdev' for 'AT Translated Set 2 keyboard'
[ 119.657] (**) AT Translated Set 2 keyboard: always reports core events
[ 119.657] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 119.657] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 119.658] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 119.658] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 119.658] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 119.658] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 119.658] (**) Option "xkb_rules" "evdev"
[ 119.658] (**) Option "xkb_model" "pc105"
[ 119.658] (**) Option "xkb_layout" "fr"
[ 119.659] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 119.659] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 119.659] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 119.659] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 119.659] (II) LoadModule: "synaptics"
[ 119.659] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 119.659] (II) Module synaptics: vendor="X.Org Foundation"
[ 119.659] compiled for 1.12.4, module version = 1.6.2
[ 119.660] Module class: X.Org XInput Driver
[ 119.660] ABI class: X.Org XInput driver, version 16.0
[ 119.660] (II) Using input driver '
synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 119.660] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 119.660] (**) Option "Device" "/dev/input/event7"
[ 119.782] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 119.782] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5762
[ 119.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4902
[ 119.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 119.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 119.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 119.783] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 119.783] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 119.783] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 119.788] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[ 119.788] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 119.788] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 119.788] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 119.788] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 119.788] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 119.788] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 119.788] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 119.788] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 119.789] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 119.789] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 119.789] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 119.790] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 119.790] (II) No input driver specified, ignoring this device.
[ 119.790] (II) This device may have been added with another device file.
[ 137.990] (II) intel(0): EDID vendor "CMO", prod id 5921
[ 137.990] (II) intel(0): Printing DDC gathered Modelines:
[ 137.990] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 138.072] (II) intel(0): EDID vendor "CMO", prod id 5921
[ 138.072] (II) intel(0): Printing DDC gathered Modelines:
[ 138.072] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 138.147] (II) intel(0): EDID vendor "CMO", prod id 5921
[ 138.147] (II) intel(0): Printing DDC gathered Modelines:
[ 138.147] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 138.223] (II) intel(0): EDID vendor "CMO", prod id 5921
[ 138.223] (II) intel(0): Printing DDC gathered Modelines:
[ 138.223] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 138.751] (II) intel(0): EDID vendor "CMO", prod id 5921
[ 138.751] (II) intel(0): Printing DDC gathered Modelines:
[ 138.751] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 497.129] (II) Open ACPI successful (/var/run/acpid.socket)
[ 497.188] (II) intel(0): EDID vendor "CMO", prod id 5921
[ 497.188] (II) intel(0): Printing DDC gathered Modelines:
[ 497.188] (II) intel(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.5 kHz eP)
[ 497.281] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found


D'avance merci, je suis paumé !

Valentin
  • scritch_science
  • ( Utilisateur )
  • Hors ligne
  • Utilisateur
  • Je ne me complais pas dans la médiocrité.
  • Message: 31
Système d'exploitation : LMDE x86_64 - cinnamon / Windows 7
Ordinateur : Asus X73SD-TY132V
Processeur (CPU) : Intel(R) Core(TM) i5-2450M @ 2.5 GHz
Carte graphique : nVidia Corporation GeForce 610M
Dernière édition: il y a 11 mois, 2 semaines par scritch_science.

[Résolu] Problème de X - Écran noir il y a 11 mois, 2 semaines #145829

Suite à une fausse manip'

Laquelle ?
  • ACey
  • ( Utilisateur )
  • Hors ligne
  • Utilisateur
  • Merci de lire les messages jusqu'au bout.
  • Message: 50

OS :
- LinuxMint 16 "Petra" x64
- Cinnamon 2.x
Proc : Athlon 2 X2 (3.1GHz)
RAM : 2 x 4Go DDR3
Carte Graphique : NVidia GTX 460 256Bit 'EliteGroup'

[Résolu] Problème de X - Écran noir il y a 11 mois, 2 semaines #145831

Salut,

Dans ton /var/log/Xorg.0.log je vois beaucoup de warning, mais bon ... et par contre une erreur :
[119.568] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

Tu devrais nous dire comment tu as installé ta carte graphique.

@+
  • marcy
  • ( Utilisateur )
  • Hors ligne
  • Utilisateur
  • Message: 121
Dernière édition: il y a 11 mois, 2 semaines par marcy.

[Résolu] Problème de X - Écran noir il y a 11 mois, 2 semaines #145871

  • scritch_science
  • ( Utilisateur )
  • Hors ligne
  • Utilisateur
  • Je ne me complais pas dans la médiocrité.
  • Message: 31
Système d'exploitation : LMDE x86_64 - cinnamon / Windows 7
Ordinateur : Asus X73SD-TY132V
Processeur (CPU) : Intel(R) Core(TM) i5-2450M @ 2.5 GHz
Carte graphique : nVidia Corporation GeForce 610M

[Résolu] Problème de X - Écran noir il y a 11 mois, 2 semaines #145874

Voilà la façon la plus efficace pour installer le driver proprio Nvidia :

- Désinstaller tout les paquets qui concernent Nvidia

- Les cartes de la série 6xxx (je pense que c'est ton cas) sont gérées par le paquet nvidia-kernel-dkms .

- Vérifier si les headers du noyau utilisé sont installés avec la commande :

apt-cache policy linux-headers-$(uname -r)

sinon les installer

- Installation de la CG :

sudo apt-get install nvidia-kernel-dkms nvidia-xconfig


Création d'un nouveau xorg.conf :

sudo nvidia-xconfig


Pour la configuration de la carte :

sudo apt-get install nvidia-settings



Reboot

C'est tout !
  • marcy
  • ( Utilisateur )
  • Hors ligne
  • Utilisateur
  • Message: 121
Dernière édition: il y a 11 mois, 2 semaines par marcy.

[Résolu] Problème de X - Écran noir il y a 11 mois, 2 semaines #145875

Ok, alors en fait, pendant ce temps, j'ai désinstallé tout ce qui était en rapport avec nvidia via synaptic, puis refait le tuto sus-nommé puis installé bumblebee via synaptic puis à nouveau un :

sudo nvidia-xconfig


Au reboot, ça ne fonctionnait toujours pas, j'ai modifié le xorg.conf en lui indiquant mon bus PCI :

 
Section "Device"
Identifier "Device0"
Driver "nvidia"
BusID "PCI:01:00:0"
EndSection
 


Ça ne fonctionnait toujours pas, du coup pour accéder à une session mate, j'ai renommé mon xorg.conf:

 
mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
 


J'ai redémarré mon X :

 
/etc/init.d/mdm restart
 


Et là, miracle...! Joie ! :-D

Je pense que bumblebee à tout réinstaller avec DKMS, mais je n'en suis pas sûr...
  • scritch_science
  • ( Utilisateur )
  • Hors ligne
  • Utilisateur
  • Je ne me complais pas dans la médiocrité.
  • Message: 31
Système d'exploitation : LMDE x86_64 - cinnamon / Windows 7
Ordinateur : Asus X73SD-TY132V
Processeur (CPU) : Intel(R) Core(TM) i5-2450M @ 2.5 GHz
Carte graphique : nVidia Corporation GeForce 610M
Dernière édition: il y a 11 mois, 2 semaines par scritch_science.

[Résolu] Problème de X - Écran noir il y a 11 mois, 2 semaines #145876

Pour info : j'avais entrepris d'installer le paquet conseillé par l'installateur modifié de Steam sur Debian... un truc genre lib0-nvidia-i:386 (pas sûr du tout).
  • scritch_science
  • ( Utilisateur )
  • Hors ligne
  • Utilisateur
  • Je ne me complais pas dans la médiocrité.
  • Message: 31
Système d'exploitation : LMDE x86_64 - cinnamon / Windows 7
Ordinateur : Asus X73SD-TY132V
Processeur (CPU) : Intel(R) Core(TM) i5-2450M @ 2.5 GHz
Carte graphique : nVidia Corporation GeForce 610M
Dernière édition: il y a 11 mois, 2 semaines par scritch_science.
  • Page:
  • 1
Temps de génération de la page: 0.72 secondes